From prototype to full production, our cutting department delivers crisp edges, tight tolerances, and consistent parts across metals and exotics. We combine waterjet, flat and tube fiber laser, and CNC press brake bending to get you accurate parts, faster.

Key Capabilities

  • Waterjet cutting up to 8″ thick with no heat-affected zone for pristine edges on metals and exotics.

  • 3 kW flat fiber laser for sheet up to 48″×48″ and 1/2″ thick (Aluminum, Stainless, Mild Steel).

  • 4 kW tube fiber laser for round/rectangular/structural profiles with 3-axis bevel cuts to 45°.

  • CNC press brake (44-ton, electric/dual-servo) for precise bends and repeatability.

  • Programming assistance to add tabs, bends, notches, locating marks; optimized sheet/tube nesting.

Typical Materials

Aluminum, Mild/Carbon Steel, Stainless Steel, Titanium, Brass, Copper, Inconel, and other exotics; select non-metals (stone, tile, glass) via waterjet.

Waterjet Specs

  • Cutting Envelope: X 80″ (2032 mm), Y 120″ (3048 mm), Z 12″ (305 mm)
  • Accuracy / Repeatability: 0.002″ (0.05 mm) / ±0.001″ (±0.025 mm)
  • Speed: Cutting 0–200 in/min; Free 984 in/min; Accel 0.5 m/s²
  • Materials: Aluminum, steel, stainless, tool steel, titanium, brass, copper, Inconel, stone, tile, glass, other exotics
  • Up to 8″ thick; no HAZ (ideal for sensitive materials)

Flat Fiber Laser Specs

  • Work Area (X×Y): 48″×48″
  • Max Workpiece Height (Z): 7″
  • Power: 3 kW fiber
  • Max Thickness: 1/2″ Aluminum, Stainless, Mild Steel
  • Accuracy: ±0.003″ (<0.1875"), ±0.005" (>0.1875″)

Tube Fiber Laser Specs

  • Power: 4 kW fiber
  • Lengths: Load ≥40″, Max 22′ (14.5′ max offload)
  • Sizes: Round ≤6″ Ø; Rectangular ≤6″×6.7″; Min 0.5″ (12 mm)
  • Wall Thickness (max): Mild 0.393″ (10 mm), Stainless 0.236″ (6 mm), Aluminum 0.236″ (6 mm), Copper/Brass 0.197″ (5 mm)
  • Profiles: Round, square, rectangular, oval, I-beam, C-channel, L-angle, custom profiles upon review
  • Bevel: 3-axis cutting to 45°

CNC Press Brake Specs

  • Type: All-electric, dual-servo, CNC
  • Tonnage: 44 tons
  • Bend Length: 41.0″
  • Accuracy: ±1°

  • Gauge Material Ranges:

    • Aluminum: 0.020″–0.236″

    • Mild Steel: 0.020″–0.1875″

    • Stainless: 0.020″–0.1575″

Our Process

From DFM to final QC—our cutting workflow at a glance.

Step 1

DFM & Nesting

Step 2

CAM Programming

Step 3

Cut, Deburr & Form

Step 4

Inspect & Final QC

Ready for a quote? 

Upload drawings and a material callout—turnarounds are fast.